Feeds:
Posts
Comments

Posts Tagged ‘body shop equipment’

 Why Do You Need To Use A Plasma Cutter In Your Shop?   UltraCut 40 Photo 02

The unique properties offered by utilizing a plasma cutter in the auto body shop enable many positive advantages not equalled by any other method.

Several advantages are:

  • No gas or fuel needed to operate (immediate savings)
  • A confined razor-sharp concentrated energy cuts with less dispursed heat.
  • Less buckling of material and less grinding as slag is mostly eliminated due to the very fine concentrated heat zone.
  • Compressed air is all that is needed to convert to Plasma Gas.
  • Less noise is produced providing a less hectic shop environment.
  • Make spot welds much easier to break free.

Useful Tips:

Plasma Cutting is a great asset to the body shop or industrial application that requires fast precision cutting of ALL types of metal without distortion or metal degradation. No external Gas Required so it’s great on the shop budget.

Just feed it compressed air and the UltraCut 40E Inverter Plasma Cutter will do the rest as it creates a super fine concentrated jet of heated gas of up to 20,000 degrees or more.

Just simply attach a ground and compressed air, touch the cutting tip to the metal and move the torch while cutting through ANY metal that is electrically conductive.  Metal warpage and slag is virtually gone and the cut is far superior to using the Oxy-Fuel method. You can even break spot welds too.

Once you have used plasma cutting you’ll never use your Oxy-Fuel torch again. Yes, it’s that far superior and fast while keeping your shop quiet and vastly productive.

We are running a special promotion in partnership with our premiere manufacturer AMH in bringing the premium CompuSpot UltraCut 40E plasma cutter to the auto body repair industry.

Here is the current promotion on a limited supply of premium CompuSpot UltraCut 40E Inverter Plasma Cutters now with Free Shipping and an assortment of Free consumables and Reduced Price. Promotion ends on Aug 31, 2013.

Click on the ad below and you will be taken to the Pro Line Systems website  where you can access the brochure and more information.

                 HAPPY CUTTING!  Giulio Valle  

  

Plasma Cutter

CompuSpot 40E Plasma Cutter

  Click The Ad To See The Special Deal

For further information and free consultation call Mr. Giulio Valle at

Pro Line Systems International Inc.  305-793-9503

Visit our website for other great equipment deals for your body shop  http://prolinesystems.net

Advertisements

Read Full Post »

When Industry and Education Unite

“Great Things Happen” For You..

tech connect final jpeg 6 3 3

Click the Logo To See The Tech Connect Page

While spending several years on the auto body advisory committee of the Miami-Dade Public School System several things became quite apparent to me.

For one, auto body instructors are overwhelmed keeping up with teaching students and at the same time continuing their own collision repair education and maintaining the schools certifications. Also finding employment in shops for the new graduates was part of their responsibility. I realized the seriousness and frustration behind all this so I thought it’s time to get involved in a different way than the norm, after all to expect different results while doing the same old thing is futile.

I offered to dedicate a special webpage on the Pro Line Systems International Inc website and how I thought it will help them. Their response was overwhelming and the gears started turning. The page took some time to accomplish, the Miami Dade Schools have 5 schools offering auto body repair and refinishing training. On June 22, 2013 I finally reached 99.9% finished content and published the page. All 5 schools have their own special presentation on the webpage.

I have the highest respect for all the instructors and all they do to help the collision repair industry address the desperate issues of filling the demand for qualified entry-level technicians. I have seen the lives of their students take flight because of the first class efforts these dedicated instructors of the Miami-Dade Schools Programs perform.

Pro Line Systems is proud to be setting the standard of industry and education involvement for the betterment of the collision repair industry. Pro Line Systems And Miami Dade Schools are dedicated to making the Miami-Dade Auto Body Apprentice Program an exceptional example for other school systems and collision repair industry to follow.

We are looking for contributors and supporters, it doesn’t cost. Show your involvement and join these other fine institutions already on board. We’ll place your Logo showing your involvement in making a difference to the industry and all you need to do is make some mention on your site with a link to the Pro Line Systems / Miami-Dade Schools Tech Connect Page. That’s it!

You are encouraged to visit the “Tech Connect” Portal here.  http://prolinesystems.net/miami_dade_schools.html

Your suggestions and comments are welcome, we’ll do everything to make the program exceptional so your input is helpful.

Giulio Valle

President, Pro Line Systems International Inc.

305-793-9503

sales@prolinesystems.net

Website   http://prolinesystems.net

Read Full Post »

In the market for a new spot welder? The rewards are huge but that you probably already know because you are here.

Did you know that CompuSpot Welders offer the best value and highest rated power for the collision repair industry? From the new top of the line CompuSpot 900 Fusion in 208-230V   440-480V  configuration with up to 14,000 Amps or the 220 single phase CompuSpot 500 with power to surprise. The choice is clear, quality and value do exist when you go with a CompuSpot Spot Welder. Industry approvals and built to handle the extreme body shop environment , you owe it to yourself to look deeper into owning a CompuSpot welder.

Each welder comes with it’s own assortment of welding accessories and dent pulling capabilities with years of research and development ready to work hard for your profits. Also a Progressive Liquid Cooling System which goes all the way to the very welding tips.

Visit our website for more detail on the CompuSpot brand. Pro Line Systems Proudly exhibits the full line of these very capable welders at the best price right here:  http://prolinesystems.net

Click Each Photo It’s A Direct link To That Model At The Pro Line Systems Website

fusion_crop.bmp2CPS800HF(HauteResolution)_Reversecompuspot 525

       900 Fusion                                      800HF                          CompuSpot 525

Video

Several other models are available to answer every requirement and budget.

We are available for consultation which is cheerfully given and encouraged. Call us at 305-793-9503   

Email:  sales@prolinesystems.net

Proline logo5 full jpg

Read Full Post »

Every Shop owner knows this: Bottlenecks disturb the flow of production at any stage in the repair process which results in lost revenue and customer satisfaction. Today’s tight schedules and even tighter profit margins require rethinking of the paint department production process in order to be able to achieve the best turn around times that are crucial to a shops success.

No one can expect to achieve the best results in the paint shop utilizing the same old methods of doing things.

“If You Always Do What You’ve Always Done” “You’ll Always Get What You’ve Always Got”.

So True this statement is that if a quality production facility wishes to achieve the utmost refinish quality with the lightning speed necessary to maximize refinish throughput at the lowest cost the answer is here.

 The Spectratek Overhead

Paint Curing System

So unique in quality and design it has earned a worldwide reputation as an industry standard. Pro Line Systems International Inc. represents the full line of IR and UV lamps at the best prices.

Installed in factories of all types the Spectratek Overhead system is particularly suited for the Collision Repair and Automotive Manufacturing Industry.

Here are some photos of systems in place worldwide (Click Photos To Enlarge)

TS 32KW KIA 2      Voyage en Chine 2 004     SPECTRATEK RS TRACKSYSTEM 01

Wall mounting is also an available option.   SPECTRATEK RS TRACKSYSTEM 02     TS 4K VW 4

Volkswagen Factory China

The overhead system has a Push Button Motorized Robotic Arm to help in the easy positioning of the lamp array.

Systems can be set up with the 4000 watt lamp array or the 8000 lamp array with up to 16,000 watts or more to cover extremely large areas of paint surface.

Custom Configurations are easy for manufacturing to develop for any particular application or need.

IMG00521-20121030-1438

Here is a 36,000 watt custom configuration designed especially for this customer. The Spectratherm Overhead Track System was specifically designed to maximize vehicle throughput. Utilizing the Short Wave Infra-Red curing process, it combines; lamps, unique reflectors, lamp array, and a Thermal Integrated Sensor System (TISS) to significantly reduce standard curing and drying times.

The Short Wave Infra-Red curing heads are suspended from an overhead track system, freeing up valuable floor space. An “easy glide” bridge assembly makes positioning the curing heads on any vehicle panel effortless. The articulating arm can position the array as low as 9 inches off the shop floor or raise it above the tallest SUV.

There is no maneuvering of portable floor systems between tightly spaced work bays, eliminating any fear of accidental vehicle damage. The innovative track design and its cable carrier allow the track system to span multiple bays. There are no electric cables dragging along or cluttering up the floor.

Various options are available, floor mount, ceiling mount or a combinaison of both.

Other Notable features of the Spectratek Overhead Shortwave IR Curing System.

  • Thermal Integrated Sensor System (TISS) to significantly reduce standard curing and drying times
  • Ramp time settings
  • Motorized arm positions lamp array in any position at the push of a button
  • Digital Control Box
  • Set and forget automatic sensing system / Industry leading Value Pricing
  • Shortwave technology dries material from the bottom substrate up, allowing solvents and humidity to be released

stp4000ts02    overhead8000TS-1compressed35

download_broch

For more information and a cheerful consultation call Pro Line Systems at 305-793-9503

Visit Our Website at:  http://prolinesystems.net

Read Full Post »

Fast forward to today’s modern automobile bodies and you will notice tremendous changes that impact a collision repair shop’s need to stay current. Aluminum is here and there will be more of it, and you need to be a capable repairer.

Aluminum is already positioned to be a major component in vehicle design and causing shop owners to evaluate their position as to whether equipping their business with the tools necessary to deal with aluminum repairs is a viable consideration or not.

We all to many times have put off doing what was needed to be done and then realized that we should have stepped up to the plate long before the need evolved to a critical point thus hurting our business.

Gearing up to Aluminum auto body repair does not have to be expensive nor complicated. The procedure in aluminum dent repair is quite different from steel. Proper knowledge in the approach to aluminum repair is a critical first step. Learn about it here in our special how to report.  Once you understand this information the rest is practice and understanding the proper use of your equipment investment.

Pro Line Systems International Inc. knows investing in aluminum repair is a serious decision auto body repairers’ need to seriously evaluate. Aluminum repairs will add additional revenue to your bottom line in many different ways and will pay for the investment easily.

Here is what we have done to make the decision easier than ever to get going with the capabilities to perform Aluminum Dent Repairs.

We have bundled for a limited promotion the CompuSpot 180AL with several items in a package that is Priced So Smartly that you won’t be able to justify NOT being an aluminum capable shop. Click The Photo For More Information.

compuspot-180al-special-Deal

Click Photo To Learn More

For all inquiries regarding this Special Limited Promotion

Call  305-793-9503

Pro Line Systems Logo

Read Full Post »

SPECIAL PRODUCT HIGHLIGHT

Pulling truck frames has been going on for as long as trucks have been around. Over the years several products of various degrees of practicality have been implemented to ease the difficult tasks of tough full frame straightening.

At best, many of the attempts of by manufacturers catering to the collision repair equipment market have been costly, time-consuming, aggravating and expensive attempts which amounted to products not much better than the old method of using wood blocks and chains.

EZ Clamp

EZ Clamp On Chief Stand

 EZ FRAME CLAMP

Enter the EZ Frame Clamp System. Regarded as the “Best Engineered Full Frame Clamping System Ever”.

The best testimony of a product is always from the end-user level and the EZ Frame Clamp System bursts with astounding customer approvals.

Now collision shops can set up a truck in practically as long as it takes to set up a Uni-body vehicle.

The EZ Frame Clamp Kit is designed to evolve with the changing dynamics of vehicle design material build. You gain a distinct advantage of purchasing a system immune to obsolescence.

  • Built To Last with high tensile strength  steel
    • Four Two arm clamping system for tight clearance and versatility
    • Collar with tie-down ratchet strap
    • Accessory rolling cart for convenience and organization.
    • Four EZ Clamps designed to work with any frame machine
    • Special Car-O-Liner adapters save you thousands
    • Optional Ford F-150 Clamp Adapters enable repairs without cab removal
    • Best Of All / Totally Made In The USA
    • To learn more visit Pro Line Systems International Inc

Visit Pro Line Systems International to learn more about the EZ Frame Clamp System

EZ Clamp Cart

The EZ Frame Clamp Systems comes complete with roller cart for organization

f-150 adapter

Easy Repairs On Ford F-150 Without Cab Removal with Optional Adapters. Very Slick!

Pro Line Systems 10 Year Anniversary with Big Savings
our 10 year anniversary

Pro Line Systems 10 Year Anniversary with Big Savings

For more information and our Special Anniversary Pricing for the EZ Frame Clamp System contact us at
Pro Line Systems International Inc. at  305-793-9503

sales@prolinesystems.net

Read Full Post »

ImageAuto Body Shop Equipment Purchasing Power at Pro Line Systems

Pro Line Systems International Inc. Has developed a New Wave System of Body Shop Equipment Purchasing Power for auto body shops, technical schools and various manufacturing facilities . Our business model satisfies our clients needs for top quality brand equipment at the lowest price while engaging the highest levels of customer support..

Now with our 10 year anniversary celebration in effect we are offering additional discounts on our entire product line until December 31 2012.

Combine our discounts with this for amazing savings.  Another interesting tax saving advantage is the government Section 179 program. It may not be continued in 2013. The following is a short description from thier website.

NEWS ALERT

Sep 4, 2012   Important tax planning implications updated for the 2012 tax year have been posted to this site.

Both the ‘Tax Relief Act of 2010’ as well as the ‘Jobs Act of 2010’ that passed in late 2010 affected Section 179 in a positive way for this 2012 tax year. Following are the highlights for the 2012 tax year:

2012 Deduction Limit = $139,000             Section 179 Deduction limit after adjustment for inflation has increased to $139,000 (maximum allowance would have been only $25,000 prior to the new legislation).

2012 Limit on Capital Purchases = $560,000             Section 179 Threshold for total of equipment & software that can be purchased has increased to $560,000 (threshold would have been only $200,000 prior to the new legislation).

2012 Bonus Depreciation = 50%             The new law allows 50% “Bonus Depreciation” on qualified assets placed in service during 2012

Please Note:

Section 179 Deduction is available for most new and used capital equipment, and also includes certain software.

Bonus Depreciation can be taken on new equipment only (no used equipment, no software)

When applying these provisions, Section 179 is generally taken first, followed by Bonus Depreciation – unless the business has no taxable profit in 2012.

Also, many businesses are finding Section 179 Qualified Financing to be an attractive option in 2012.
Combine the savings you’ll get with the Section 179 program with bonus deductions along with your special pricing from Pro Line Systems and you will save thousands of dollars.

Now there is no need to put off your equipment purchasing any longer – the time to strike is now.

For a handy calculator you can use to determine how much money you will save Go Here and look for the On the Page look for this button Image enter an amount and get your answer.

Visit Us At. http://prolinesystems.net for all your body shop equipment.

Image

305-793-9503         sales@prolinesystems.net

Lease Purchse Plans Are Available (more…)

Read Full Post »

« Newer Posts - Older Posts »

%d bloggers like this: